Czyszczenie i pielęgnacja
KÄHRS OLEJ
Olej satynowy do pielęgnacji i ochrony olejowanych podłóg drewnianych. Zwiększa odporność na wilgoć i odnawia wykończenie powierzchni. Nakładaj w cienkich, równomiernych warstwach dla najlepszych efektów. Odpowiedni do regularnej pielęgnacji lub zabiegu po montażu, aby wzmocnić i zabezpieczyć podłogę.
239 zł
Ceny z VATIlość
Ponad 100 na stanie
O produkcie
Informacje o produkcie
| Packaging dimensions | |
| Szerokość | 85 mm |
| Długość | 85 mm |
| Informacje ogólne | |
| Kolekcja | Czyszczenie i pielęgnacja |
| Surface Colour | Clear |
| Accessory Sub-type | Maintenance |
| Accessory type | Maintenance |
| Wykończenie powierzchni | Olej |
| How to use | <p><a href="https://youtu.be/eGD2l7NyLZc?si=we6AAUVKChnfL2wf">See instructions in our dedicated video</a></p> <p>Vacuum clean the floor carefully.<br />Clean the floor using Kährs Cleaner and Micro Mop. Follow the Kährs Cleaner instructions. Only damp cleaning, the surface should be dry again within a minute.<br />For very dirty floors replace the micro mop using a rough brush.<br />Remove cleaner and dirt using a wrung out cloth.<br />Dry the surface using a dry cloth and leave the floor to dry for 30 minutes. For very dirty floors or on floors with heavy textures, it might be necessary to repeat step 2-4.<br />Protect the floor from direct sunlight and keep off all underfloor heating from day before application till 24 hours after application.<br />The temperature of the floor, oil and air must be between 13°C (55°F) and 25°C (77°F).<br />Relative humidity of the room should be between 40% and 60%. Higher humidity of room extends drying time of finish thus waiting time between layers<br />Apply a thin layer of Kährs Satin Oil on the surface and spread it evenly with a Kährs Micro Mop or a dry cloth by scrubbing along the texture.<br />Shake the can vigorously. Polish again with a new Micro Mop after 10-15 minutes so that no sticky parts are left.<br />Please observe that two layers of thin oil gives a better result than one thick layer. Applying a too high amount of oil will result in a sticky surface.<br />Recommended dosage: 100 ml (1 dl) of Kährs Satin Oil per 30m2.<br />Note! A danger of self-ignition exists in contact with organic materials (e.g. cotton cloths, saw dust, absorbing insulation materials etc.) due to self-drying<br />oil content. Rags and other organic materials soaked in oil have to be put into water immediately after use, in order to avoid self-ignition.</p> |
| Ingredients | Urethane modified alkyd resin<br />Solvent: N-Paraffins<br />Solids by weight: Approx. 22% |
| Numer artykułu | 710553 |